Tuesday, January 6, 2009

Whats A Good Base Scanner

Bell M92 Beretta

Review of Beretta M92 Full Metal Gas Bell:



Name:
BELL EG707 Price: € 55
Weight: 1 Kg '02
Fps: 290
Charger Capacity: 25 bb's
Full Metal Blowback gas powered.


The Beretta M92 Full Metal Bell brand is a good buy for its price / quality ratio. The weight of the replica is the actual weight, and its characteristic of Blowback (reverse) gives a touch of realism equally impressive, when we run out of ammo in the magazine, the gun will run backwards.

The main strength of the Beretta is its robustness. It is an all metal replica, which supports all shots except two internal parts of the canyon, which is the air chamber i the cup, but that can only be damaged externally if dismantle the reply.
In fact, these pieces are made of plastic is a disadvantage, however, no another brand offers quality at this price we get with Bell. It also comes with a kit of parts of both pieces.

The main serious problem that can be replicated is a break in one of these pieces. However, the M92 is very easy to remove, and if properly followed the instructions on the box have the problem solved soon. However needed to identify the problem, if it breaks the air (which is filled with gas from the charger) when firing gas will leave all the slots on the gun and emptied the magazine, or simply not open slot camera when the trigger is pressed nothing happens. If you break the cup, the problem is we that the gun that makes the movement of blowback, remain stuck to the party from behind, as when we finished ammunition.

These two problems occur mainly when they freeze the internal components of the replica. This may occur for several reasons:
  • are shooting the M92 tilted sideways or backwards. With this reply, we undertake this action gun chokes and release gas into the chamber which then loses
  • shoot the replica without ammunition
  • shoot very current (more than 15 bb's in a row and we can consider excessive)

When these components are frozen, if we activate the reply, they support the normal pressure due to gas, but they become more fragile as the plastic fibers crystallize. This is especially dangerous to the cup, as it is flexible, and if it freezes, fails to fit the camera, and every second shot and hit it, since no molds, just about to break.
However, in a normal game these situations are really rare.

FOR MORE INFORMATION ON THE BERETTA, LOOK AT THE COMMENTS

0 comments:

Post a Comment